Electrical Engineer
Vacancy has expired
Fort Worth, TX
| Employer: | Bureau of Engraving and Printing |
| Job Type: | Full Time |
Description | |
|
Duties As an Electrical Engineer, you will:
Requirements Conditions of Employment If you do not meet any of the categories listed above, you may wish to apply under announcement , 24-BEP-329-P. which is open for any U.S. citizen to apply. Please refer to that announcement for details on open period, eligibility, and how to apply. Requirements: The experience may have been gained in either the public, private sector or volunteer service. One year of experience refers to full-time work; part-time work is considered on a prorated basis. To ensure full credit for your work experience, please indicate dates of employment by month/day/year and indicate number of hours worked per week on your résume. Key Requirements:
SUITABILITY, CLEARANCE & REQUIREMENTS: A background investigation will be required for all new hires. Appointment will be subject to the applicant's successful completion of a background investigation and favorable adjudication. Failure to successfully meet these requirements will be grounds for disqualification in the hiring process. The background investigation process conducted by the Bureau of Engraving and Printing is very thorough. Therefore, it is imperative that applicants exercise candor and honesty when answering background questionnaires, especially as it relates to arrest, employment, education, finances, illegal drug use, and/or other criminal history. Falsification discovered in security documents or during the background investigation process may result in an immediate negative suitability determination or immediate revocation of your interim clearance (if applicable). Qualifications You must meet the following requirements by the closing date of this announcement. Specialized experience for the GS-12 is one year of experience at the GS-11 level or equivalent in other public or private sectors, that is directly related to the position as listed in this announcement and which has equipped the candidate with the particular knowledge, skills, and abilities to successfully perform the duties of the position. Specialized experience is defined as: - Ensuring deliverable products are consistent with engineering specifications and customer requirements; AND - Overseeing contract workers; AND- Monitoring, troubleshooting and recommending improvements for major utility systems such as: water, gas, air, vacuum, waste, (HVAC (Chilled water/steam/air handlers), Electrical systems (Switchgear, substations, generators, distributions, branch panels), Building Envelope (Doors/Windows/Roof) and Various Interior System). In addition to the above requirements, you must meet the following time-in-grade requirement, if applicable: For the GS-12, you must have been at the GS-11level for 52 weeks. Education Education Requirements: The education generally must be from an accredited (or pre-accredited) college or university recognized by the U.S. Department of Education. If you are qualifying based on foreign education, you must submit proof of creditability of education as evaluated by a credentialing agency. Refer to the OPM instructions. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelors degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) Additional information OTHER INFORMATION:
How You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications above. Your application includes your résumé, responses to the online questions, and required supporting documents. Please be sure that your résumé includes detailed information to support your qualifications for this position; failure to provide sufficient evidence in your résumé may result in a "not qualified" determination. Rating: Your application will be evaluated in the following areas:
Your application will be rated and ranked among others, based on your responses to the online questions, regarding your experience, education, training, performance appraisals and awards relevant to the duties of this position. A subject matter expert may be used in the evaluation. Your rating may be lowered if your responses to the online questions are not supported by the education and/or experience described in your application. Referral: If you are among the top qualified candidates, your application may be referred to a selecting official for consideration. You may be required to participate in a selection interview. We will not reimburse costs related to the interview such as travel to and from the interview site. ??????? If you are a displaced or surplus Federal employee (eligible for the Career Transition Assistance Plan (CTAP)/Interagency Career Transition Assistance Plan (ICTAP)) you must score 90 or better to be rated as "well qualified" to receive special selection priority. Required Documents Please note that if you do not provide all required information, as specified in this announcement, you may not be considered for this position (or may not receive the special consideration for which you may be eligible). Please ensure all required documents, including any required work samples, narratives, or other materials as stated in this announcement, are attached to your application package. To apply for this position, you must submit a complete Application Package which includes: All applicants must submit a résumé showing work schedule, hours worked per week, dates of employment and duties performed. All applicants are required to submit arésumé either by creating one in USAJOBS or uploading one of their own choosing. (Cover letters are optional.) We suggest that you preview the online questions, as you may need to customize your résumé to ensure that it supports your responses to these questions. Please view résumé tips. All applicants must submit a Performance Appraisal or explanation: a copy of your most recent, signed, completed annual performance appraisal which includes the final rating. If it is not dated within the last 18 months, or if you have not received a performance appraisal, please explain why in your application. Note that 'N/A' is not an acceptable answer. If you do not provide a copy of the performance appraisal, or a statement advising why it is unavailable, you will be removed from further consideration. All applicants must submit vacancy assessment question responses: All applicants are required to complete vacancy question responses by clicking the apply online button of this vacancy announcement. CURRENT AND FORMER FEDERAL EMPLOYEES -- Documentation Relating to Your Federal Employment: - Submit a copy of your SF-50, Notification of Personnel Action, which shows your current (or most recent) grade and competitive service status. (The "position occupied" block on the SF-50 should show a "1" and your "tenure" block should show a "1" or "2".) - If you are currently on a Veterans Recruitment Appointment (VRA), submit a copy of an SF-50 showing that. Also, you must submit a copy of your DD214 or other documentation showing dates of service and type of discharge and any other applicable documents such as SF-15, VA letters, etc. - Indicate on your application the highest permanent grade you have held; if this grade is different from your current grade, submit a copy of an additional SF-50 showing this grade. - Federal employees must submit a copy of their latest SF-50 "Notification of Personnel Action" that reflects career or career-conditional tenure showing position title, series, grade and tenure (please do not submit an Award SF-50 as it does not provide the needed information) and, if different, an SF-50 showing highest permanent grade ever held or you may not be considered under the merit promotion process. https://www.usajobs.gov/Help/working-in-government/service/SF-50/ CAREER TRANSITION ASSISTANCE PLAN (CTAP) OR INTERAGENCY CAREER TRANSITION ASSISTANCE PLAN (ICTAP) DOCUMENTATION: If you are a displaced or surplus Federal employee, click CTAP/ICTAP for eligibility and a detailed list of required documents you must submit in order to be eligible. NON-COMPETITIVE REINSTATEMENT: If you are a former federal employee that has been separated for at least 1 year and wish to be non-competitively reinstated to a higher grade or full performance level than which you left federal employment , you MUST provide a copy of your separation SF50 (the "position occupied" block on the SF-50 should show a "1" and your "tenure" block should show a "1" or "2") AND you MUST submit a qualifying performance appraisal from your most recent career or career-conditional position of at least Fully Successful (or equivalent). You will NOT be given consideration for non-competitive reinstatement, under this option, if a performance appraisal document is not submitted. If you are applying under a special hiring authority (e.g. Military Spouses, Interchange Agreement, VEOA, VRA, Schedule A Disability, etc.), please see applicant guide for required documentation. In order to be eligible under one of these authorities, you must submit all required documentation as outlined in the applicant guide. EDUCATION DOCUMENTATION: For positions with an education requirement, or if you are qualifying for this position by substituting education or training for experience, submit a copy of your transcripts or a list of courses showing title, number of credits, grade, and date of completion. | |